------------------------------------Welcome--------------------------------------Welcome to our store, I hope you can buy your favorite products in our store.Our store sells a variety of products. Please take some time to browse our store, I am sure there will be something you will like. Happy shopping!?Production steps?:1. Pull out the plastic inner cylinder and pour water into the silicone container, slightly more than 2 grids, not more than 2 and a half grids.2. Slowly insert the inner cylinder with the cover into the silicone cavity, pays attention to rotating it to the bottom and hold it down, and then gently pinch the silicone side under the cover to vent the inner cylinder to prevent the inner cylinder from floating.3. Put the molds at room temperature for a few minutes; if you don’t want to wait and press hard, you can pour a proper amount of hot water into the inner cylinder, pour out the hot water for about 10 seconds, and then easily pull out the inner cylinder)4. Press the outer wall of the silicone to continuously adjust the angle to remove the ice cubesSize: 9x8.5cmx8.5cmPackage Included: 1x Ice Lattice Molds.Warm Tip: 1. Please allow 1-2cm difference due to manual measurement.2. due to the lighting effect, monitor's brightness, manual measurement, etc., there could be some slight differences in the color and size between the photo and the actual item. Sincerely hope that you can understand! Thank you!3. If you are not satisfied with the received goods or the received goods are damaged, please contact us in time before applying for a return, and we will reply to your questions within 24 hours.4. We will try our best to choose the best logistics channel for you, you will usually receive the package within 7-15 days.