Electric Family Pasta Maker Machine LEONEBEBE noodle maker machine is made of high-quality materials, all-metal nickel-plated, compact structure, novel shape, beautiful appearance, clean and hygienic. Please note that JCD-5 can only make ONE size of noodle. 2.5mm round noodle and flat noodle The thickness of 6-gear dough can be adjusted: pull out the regulating valve port and rotate left and right to adjust the thickness of dough. Strong energy saving, stable performance of pure copper wire motor, 150W power, suitable for household use, low energy consumption. Easy to clean: After use, turn off the power and clean the machine with a cloth or brush. The excess dough sticking to the parts can be cleaned easily by hand, and then wipe with water or a damp cloth. Specification: Model: One-knife mini electric noodle maker; Material: Food grade stainless steel; Power: 110V; Voltage: 135W; Frequency: 50Hz; Output: 5kg/h; Blade: 1 blade for 2.5mm round noodle and flat noodle; Thickness of dough: 0.3mm-4mm; Width of dough: 14cm; Weight: 8kg; Feature: 2-in-1: Press dough and cut noodles; Application: 2.5mm round noodle; 2.5mm linguine; dumpling skin; wonton skin. In addition to pressing thick and thin noodles, this machine can also press noodles, dumpling wrappers, bun wrappers, wonton wrappers and other pasta, with neat shapes and uniform thickness. The thickness of 6-gear dough can be adjusted: pull out the regulating valve port and rotate left and right to adjust the thickness of dough. Important Tip Please note that when you adjust the gears the screw must be inserted into the hole, otherwise the electric noodle maker machine will be damaged. Warm Tips: 1. Do not use water for cleaning, mainly because of two points: Firstly, prevent some accessories from rusting and performance degradation. Secondly, prevent the residual surface from hardening, which is more difficult to clean and damage the accessories. 2. The dough must be dry and not too wet. The best ratio of flour to water is 10:3. Turn the surface of the flour until the mixture is even and the dough does not stick to your hands/fingers. When turning on the noodle maker, sprinkle some flour on the rollers. Press the mixed noodles into flat pieces and place them on the machine. 3. Don't put too much when passing the machine, otherwise it will stick. The dough should not be too thick. If it is too thick, it will clog the rollers and the motor will emit a strange smell. 4. When you want thin noodles, because thin noodles have a smaller knife hole, the noodles have to be pressed very thinly to make thin noodles. 5. If at any time the dough starts to stick to the machine, just add flour to the dough sheet and rollers of the machine. 6. Run the dough through the Fettuccine blades to cut. Lay on paper towels to dry. So easy.