Raspberry Pi Motor Driver Board v1.0 is based on the Freescale MC33932 dual H-Bridge Power IC, which can control inductive loads with currents up to 5.0A peak per single bridge. It lets you drive two DC motors with your Raspberry Pi B/B+/A+ and Pi 2 Model B, controlling the speed and direction of each one independently.Raspberry Pi Motor Driver Board v1.0 support a very wide range of input voltage from 6V~28V. otherwise ,the on board DC/DC converter support a very wide range of input voltage, and can provide a 5V power supply for the Raspberry Pi with 1000mA maximum current. So, you just need one power supply to drive the motors and power up the Raspberry Pi. Features: - Operating Voltage: 6V ~ 28V- DC/DC output: 5V 1000mA @ "5V" pin- Output Current(For Each Channel ): 2A (continuous operation) / 5A(peak)- Output Duty Range: 0%~100%- Output short-circuit protection (short to VPWR or GND)- Over-current limiting (regulation) via internal constant-off-time PWM- Temperature dependant current limit threshold reduction- Raspberry compatibleSpecification: - Compatible:Raspberry Pi ; Other main board via jumpers;- Power interface:DC Jack;Dimension: - Operating Voltage:6V ~ 28V